Signet Ring 18K Gold Plated (Engraved) on a Stainless Steel Base With Real Gold Plating
A classic signet ring with a flat top face for engraving with initials, a name or a symbol. The base is stainless steel with real 18K gold plating at 2.5 microns. This is the only steel product in the range with real gold plating instead of a PVD finish, and that is a deliberate choice.
Product details
Base material: stainless steel
Finish: 18K gold, 2.5 microns
Sizes: 6 to 10 (US sizes)
Engraving: text or photo, on the flat top face
Delivered in a Carpe Ice jewelry box
Why Plating Here and Not PVD
Our other steel jewelry has a gold-tone PVD finish: harder and more scratch-resistant, but it is a colored layer rather than gold. On a signet ring what matters is the color close up, because there is a large face of metal on show and the ring sits on your hand rather than hanging at a distance. Real 18K gold plating gives a warmer, deeper tone than PVD can reach. Against that, plating is softer, so this ring asks a little more care than a PVD one.
What 2.5 Microns Means
Micron is the thickness of the gold layer. What the jewelry trade calls gold plated often starts around 0.5 micron; this layer is five times as thick. It is not a guarantee of a number of years, because how long a layer lasts depends on how you wear it, and of all jewelry a ring takes the most knocks. Take it off before DIY, sport, washing up, showering and swimming, and the color stays even for longest.
What You Can Put On It
The flat top face has room for initials, a name, a date or a small symbol, and a photo engraving is possible too. Keep it short: on a signet ring a single letter or a set of initials comes out more crisply than a face filled with writing. Engraving removes material, so the cut goes through the gold layer and takes on the color of the steel underneath. On a single large initial that contrast between gold and steel is the classic effect, but it makes fine detail busier; if you want a photo or a longer text engraved, the silver version is the better choice.
Choosing Your Size
The ring comes in sizes 6 to 10. These are US sizes and half sizes do not exist. Choose the smallest size that still slides comfortably over your knuckle, even if you are between two sizes. The larger size when in doubt applies only to the wide bands in the size chart: the cuban ring, the Ice Blox and the box ring. You can find which diameter matches which size in our ring size chart. Measure at the end of the day, because fingers are slightly thicker then than in the morning. A signet ring has a heavier head than a plain band, so it must not sit too loose: if it turns, the flat face ends up on the side of your finger and the engraving disappears from view.
Care
Soap and hand cream collect in the engraved lines, which dulls the text over time. A dry, soft toothbrush makes it crisp again. Otherwise lukewarm water and mild soap are enough, always dried thoroughly. Do not use an ultrasonic bath or abrasives: those are meant for solid metal without a finish and will strip plating away.
Shipping
Free shipping from €85 in most EU countries.
Ordered before 5 PM on business days, shipped the same day.
Netherlands: 1-3 business days Belgium and Germany: 2-4 business days United Kingdom, Spain, Sweden, Switzerland: 2-5 business days Other EU countries: 3-7 business days
You will receive a tracking link by email once your parcel is on its way.
Returns
Not the right fit or want to exchange it? You can return or exchange your order within 14 days.
Frequently asked questions about the gold plated signet ring
Will this ring turn my finger green?
No. Green marks come from copper and brass. This ring is made of 316L surgical steel, which won't discolor your skin, even if you wear it every day.
Which size should I choose?
The ring comes in US sizes 6 to 10, with no half sizes. Choose the smallest size that still slides smoothly over your knuckle. A signet ring has a heavier top, and if it's too loose, the engraving turns to the side of your finger. Measure at the end of the day, when your fingers are slightly thicker than in the morning.
Can I exchange it if the size doesn't fit?
Without engraving, you can within 14 days of receiving it. An engraved ring is made especially for you and can't be exchanged or returned. Not sure about your size? Check our ring size chart first.
What is this ring made of?
316L surgical steel, hand polished to a high shine and then gold plated with a 2.5 micron layer. That gives a warm, deep gold tone. This layer is softer than PVD, so the ring needs a little more care than our PVD jewelry.
How do I keep the gold color looking its best?
A ring touches doors, keyboards and your steering wheel all day. Take it off for swimming, showering, sport, DIY and doing the dishes, and store it dry. That way the gold plating stays like new the longest.
What can I have engraved?
Initials, a name, a date, a small symbol or a photo, on the flat top. Keep it short: a single letter or a set of initials comes out sharpest. The engraving cuts through the gold plating and takes on the color of the steel underneath. That contrast suits a large initial; for a photo or longer text, the silver tone signet ring is the better choice.
How do I clean the ring?
Lukewarm water, a drop of mild soap and a soft cloth is all you need. Pat it dry well. Dust collects in the engraved lines; a dry, soft toothbrush makes the engraving sharp again. Avoid silver polish, abrasive cleaners and ultrasonic baths, as they damage the gold plating.